LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Cavalier Base, 2D Coupe, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls Self-Diagnostics - 2.2L >> System Tests >> Mil On Steady >> Diagnostic Procedures

Diagnostic Procedures

  1. Perform diagnostic system check - engine controls. See DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM. After performing diagnostic system check - engine controls, go to next step.
  2. Turn ignition off. Disconnect PCM. Turn ignition on, with engine off. Observe the MIL. Is the MIL illuminated? If yes, go to next step. If no, go to step  5.
  3. Remove the Instrument Panel Cluster (IPC). Test the MIL control circuit for a short to ground between the PCM and IPC. Did you find and correct the condition? If yes, go to step  6. If no, go to next step.
  4. Replace IPC. After replacing IPC, go to step  6.
  5. Replace PCM. See appropriate REMOVAL, OVERHAUL & INSTALLATION article. Perform PCM relearn procedure. See POWERTRAIN CONTROL MODULE REPROGRAMMING  under PROGRAMMING. After repairs, go to next step.
  6. Operate the system in order to verify the repair. Did you correct the condition? If yes, system is okay. If no, go to step  2.
scientia non olet · About LEMON Manuals