Conditions For Running DTC

DTCs P0102, P0103, P0107, P0108, P0401, P0403, P0404, P0405, P0440, P0442, P0443, P0446, P0449, P0606, P1106, P1107, P1404, P1441, P1514, P1515, P1516, or P1517 are not set.
DTCs P1120 and P1220 as a combination are not set.
DTC P1518 is not set in combination with any of the following DTCs P1120, P1125, P1220, P1221, P1271, P1272, P1273, P1275, P1276, P1280, P1281, P1285, P1286.
The engine is running.
The ignition 1 signal is 9-18 volts.
The MAP sensor is less than 80 kPa.
The change in the MAP sensor is less than 5 kPa.
The Throttle Position (TP) sensor angle is less than 30 percent.
The change in the TP sensor angle is less than 5 percent.
The conditions are met for 2 seconds.