LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the front wheel hub/speed sensor assembly. Refer to Wheel Bearing/Hub Replacement - Front .
    4. Fig 1: Removing Wheel Stud From Axle Flange
    GM649304Courtesy of GENERAL MOTORS CORP.
  4. Install tool J 43631  onto the wheel hub and stud. See Special Tools and Equipment .
  5. Turn the forcing screw in until the stud is pushed out of the wheel hub.
scientia non olet · About LEMON Manuals