LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Prizm. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt (2) which secures the windshield washer solvent container (1). Position the solvent container aside in order to gain access to the washer pump electrical connector.
    Fig 1: Removing Bolt Securing Windshield Washer Solvent Container
    G01639241Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the windshield washer pump electrical connector (1).
  3. Disconnect the washer hose (3) from the washer pump (2).
    Fig 2: Disconnecting Windshield Washer Pump Electrical Connector
    G01639242Courtesy of GENERAL MOTORS CORP.
  4. Drain the washer solvent.
  5. Remove the washer solvent container (1) from the vehicle.
  6. Remove the washer pump (2) from the washer solvent container (1).
    Fig 3: Removing Washer Pump
    G01639243Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals