LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Venture LT >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel, Display And Gauge System - Analog >> Programming >> Compass Calibration >> Automatic Calibration

Automatic Calibration

  1. Place DIC in COMPASS/TEMPERATURE mode. Depress and hold down both MODE and E/M buttons. Ignore variation zone which shows up after 5 seconds and continue holding buttons. After ten seconds, DIC will acknowledge that calibration is requested by illuminating "C" indicator on compass display (if not already illuminated).
  2. To calibrate compass, drive vehicle through 2 circles at less than 5 mph in a magnetically clean area. DIC "C" indicator will disappear and DIC will display proper variation zone. See Figure .
scientia non olet · About LEMON Manuals