Lighting Diagnostic System Check
NOTE:
LIGHTING DIAGNOSTIC SYSTEM CHECK applies to courtesy/illuminated entry lights only.
- Attempt to enter Body Control Module (BCM) diagnostic mode. See ON-BOARD DIAGNOSTICS . If BCM enters diagnostic mode, go to next step. If BCM does not enter diagnostic mode, perform TEST A: BODY CONTROL MODULE INOPERATIVE under SYSTEM TESTS.
- If BCM does not display DTC 2 or DTC 3, go to next step. If BCM displays DTC 2 or DTC 3, perform DTC 2: COURTESY LIGHTS BATTERY FEED CIRCUIT or DTC 3: COURTESY LIGHTS CONTROL CIRCUIT under DIAGNOSTIC TESTS.
- If any other BCM DTCs are displayed, perform appropriate test in accordance with DTC retrieved. See BODY CONTROL MODULE DTC INDEX table. If no BCM DTCs are displayed, repair courtesy/illuminated entry lights as necessary. See appropriate ILLUMINATION/INTERIOR LIGHTS article.