LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, RWD, Standard >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Removal & Installation >> Starter >> Installation

Removal & Installation: Starter: Installation

  1. Install the starter motor assembly to the vehicle. Install the lower mounting bolt. Install the upper mounting bolt and the negative battery cable. Tighten the starter motor assembly mounting bolts to specifications. See TORQUE SPECIFICATIONS  .
  2. Connect the positive battery cable to the starter solenoid. Secure with one nut. Tighten the starter solenoid nut to specifications. See TORQUE SPECIFICATIONS  .
  3. Connect the starter solenoid electrical connector. Install the air cleaner hose. Connect the negative battery cable. Tighten the negative battery cable-to-negative battery terminal retainer to specifications. See TORQUE SPECIFICATIONS  .


  1. Install the starting motor through the front area of the engine compartment between the generator and the inner fender. Raise and support the vehicle.
  2. Install the mounting bolts. Tighten the starter motor mounting bolts to specifications. See TORQUE SPECIFICATIONS  .
  3. Lower the vehicle. Connect the positive battery cable to the starter solenoid. Secure with the nut. Tighten the starter solenoid nut to specifications. See TORQUE SPECIFICATIONS  .
  4. Connect the starter solenoid electrical connector. Connect the negative battery cable. Tighten the negative battery cable-to-negative battery terminal retainer to specifications. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals