LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Bench Testing >> Solenoid Pull-In & Hold-In Resistance Test

Solenoid Pull-In & Hold-In Resistance Test

  1. Using an ohmmeter, measure resistance between solenoid terminal "S" and terminal "M". If resistance is 5.0 ohms or less, pull-in coil is open. Replace solenoid.
  2. Using an ohmmeter, measure resistance between solenoid terminal "S" and solenoid housing. If resistance is 5.0 ohms or less, hold-in coil is open. Replace solenoid.
scientia non olet · About LEMON Manuals