LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Suburban K2500, 6.0 U >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - 8.1L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (Except Utility) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel level sensor (3).
  2. Install the sensor retaining clip (4).
  3. Connect the electrical connector (7) to the fuel level sensor.
  4. Connect the retaining clip (6) to the fuel level sensor electrical connector.
  5. Connect the fuel pump electrical connector (5).
  6. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals