LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Suburban C1500 >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Tie Rod Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Front Tie Rod Components
    GM340960Courtesy of GENERAL MOTORS COMPANY
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. IMPORTANT:

    Use the J 24319-B  in order to separate all the tie rods and ball joints.

  2. Remove the nut (2) from the outer tie rod ball stud (3).
    3. Fig 2: Removing Outer Tie Rod Assembly From Steering Knuckle
    GM643351Courtesy of GENERAL MOTORS COMPANY
  3. Use the J 24319-B  in order to remove the outer tie rod ball stud from the steering knuckle.
    4. IMPORTANT:

    Do not reuse the nut.

  4. Remove the tie rod end from the shaft by loosening the jam nut .
  5. Remove the outer tie rod end from the relay rod.
    6. Fig 3: Front Tie Rod Components
    GM340960Courtesy of GENERAL MOTORS COMPANY
  6. Inspect the shaft (6) for bent or damaged threads.
  7. Clean the tapered surface of the steering knuckle (1).
scientia non olet · About LEMON Manuals