Installation Procedure
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
The embossed arrow on the MAF/IAT sensor indicates the proper air flow direction. The arrow must point toward the engine.
- Locate the air flow direction arrow (2) on the MAF/IAT sensor.
- Install the MAF/IAT sensor (4) on to the air cleaner housing (5).
- Tighten the clamp securing the MAF/IAT (4) sensor to the air cleaner housing (5).
- Connect the MAF/IAT electrical connector.
- Install Air Intake Resonator. Refer to Intake Air Resonator Replacement .