LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Suburban C1500 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - 8.1L - Repair Instructions) >> Repair Instructions >> Knock Sensor 2 Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the wiring harness connector from the KS (2).
  3. Fig 1: Locating Knock Sensor 2
    GM20272Courtesy of GENERAL MOTORS COMPANY
  4. Remove the KS (2) from the engine block (1).