Cruise Control Switch: Removal
- Remove steering wheel inflatable restraint module. See appropriate AIR BAG RESTRAINT SYSTEMS article.
- Disconnect cruise control switch electrical connector (1) from steering wheel inflatable restraint module coil. See Fig 1
.
- Open Terminal Position Assurance (TPA) on top of cruise control switch electrical connector with a terminal remover from J-38125-B.
- Remove Red/Blue wire (2) from cruise control switch electrical connector (1) with a terminal remover from J-38125-B. See Fig 2
.
- Using a Allen head socket, remove right horn contact bolts.
- Remove right horn contact (2) from steering wheel. See Fig 1
.
- Remove 3 cruise control switch screws (4) and cruise control switch (3).
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.