LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Metro >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls Self-Diagnostics - 1.3L >> Diagnostic Tests >> DTC P0603: Control Module Long Term Memory Reset >> Diagnostic Procedures

Diagnostic Procedures

  1. Perform powertrain diagnostic system check. See POWERTRAIN DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM. After performing powertrain diagnostic system check, go to next step.
  2. Using scan tool, clear DTC information. Turn ignition on to initialize PCM. Start engine. Operate vehicle. If necessary, repeat road test. If vehicle does not start, crank engine so that DTC P0603 can set. If DTC resets, go to next step. If DTC does not reset, see DIAGNOSTIC AIDS .
  3. Turn ignition off. Replace PCM. Perform PCM relearn procedure. See POWERTRAIN CONTROL MODULE  under PROGRAMMING. After replacing PCM, go to next step.
  4. Turn ignition on, with engine off. Using scan tool, clear DTC information. Operate vehicle within FREEZE FRAME/FAILURE RECORDS data conditions that set DTC. Check for DTCs. If no DTCs are stored, repair is complete. If any DTCs are stored, diagnose affected DTCs. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .
scientia non olet · About LEMON Manuals