Test E: Security Indicator Inoperative
- Perform anti-theft system diagnostic system check. See ANTI-THEFT SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. If anti-theft system diagnostic system check has been performed, go to next step.
- Turn ignition switch to RUN position. Observe SECURITY indicator in instrument cluster massage center. If SECURITY indicator is illuminated during bulb check, check for intermittent problem. See DIAGNOSING INTERMITTENTS . Repair or replace as necessary and go to step 4 . If SECURITY indicator is not illuminated during bulb check, go to next step.
- Replace instrument panel cluster. See INSTRUMENT PANEL CLUSTER under REMOVAL & INSTALLATION in ANALOG INSTRUMENT PANELS - IMPALA & MONTE CARLO article. After repair, go to next step.
- Operate system to verify repair. If system operates normally, repair is complete. If system does not operate normally, return to step 2 .