Cruise Control Diagnostic System Check: 2001
- Install scan tool to DLC connector. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP under SYSTEM TESTS in appropriate BODY CONTROL MODULES article.
- Turn ignition on, engine off. Attempt to establish communication with PCM. If scan tool communicates with PCM, go to next step. If scan tool does not communicate with PCM, see TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE under SYSTEM TESTS in appropriate BODY CONTROL MODULES article.
- Select PCM display DTCs function on scan tool. If scan tool displays any DTCs, perform appropriate diagnostic test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS .