LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical 5.7L V8 >> Engine Oiling >> Engine Oil Pressure Sensor And/Or Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to INTAKE MANIFOLD .
    G00590497Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine oil pressure (EOP) sensor electrical connector.
    IMPORTANT: Clean the area around the EOP sensor before removal.
    G00590498Courtesy of GENERAL MOTORS CORP.
  3. Remove the EOP sensor.
scientia non olet · About LEMON Manuals