Microphone Replacement - Radio Volume COMPENSATOR Interior

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Radio Volume Microphone Compensator

Courtesy of GENERAL MOTORS CORP.

MICROPHONE REPLACEMENT - RADIO VOLUME COMPENSATOR INTERIOR

Callout	Component Name
NOTE: Refer to FASTENER NOTICE in Cautions and Notices. Fastener Tightening Specifications: Refer to FASTENER TIGHTENING SPECIFICATIONS .
1	Panel Assembly, Driver Knee, Bolster REFER TO TRIM PANEL REPLACEMENT - KNEE BOLSTER .
2	Screw, Radio Volume Microphone (Qty: 2) Tighten: 2 N.m (18 lb in)
3	Microphone Assembly, Radio Volume