Code Enable Criteria

For DTC to run, the following conditions must be met:

• DTCs P0100, P0101, P0103, P0110, P0111, P0112, P0113, P0117, P0118, P0125, P0500, P0501, P0502, P0503, P1114, or P1115 are not set.
• Coolant temperature is -40°F to 158°F (-40°C to 70°C).
• Intake air temperature is 19°F (-7°C) or more.
• Engine has been running for 2-22 minutes.
• Vehicle speed is more than 5 MPH for more than 1.5 miles (2.4 km).
• Mass airflow average reading is more than 23 grams/second.

DTC will set if the engine coolant fails to reach preset temperature before a calculated airflow is accumulated.