LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Chevy Express G2500, Van Cargo Extended, 6.5 F >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Self-Diagnostic System >> Engine Cooling System Diagnostic Check

Engine Cooling System Diagnostic Check

  1. Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC), located below steering column. Turn ignition switch to RUN position. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP  under SYSTEM TESTS.
  2. Using scan tool, attempt to communicate with Powertrain Control Module (PCM). If scan tool communicates with PCM, go to next step. If scan tool does not communicate with specified modules, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Select DISPLAY DTCs function on scan tool for PCM. If scan tool displays any DTCs go to next step. If scan tool does not display any DTCs, repair cooling system by symptom.
  4. If scan tool displays DTCs which begin with "U", go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS. If other DTCs are displayed, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  .
scientia non olet · About LEMON Manuals