LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Cavalier Base, 2D Coupe, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Removal & Installation >> Electronic Brake Control Module >> Removal & Installation

Removal & Installation

  1. Disconnect Electronic Brake Control Module (EBCM) harness connector. Disconnect EBCM harness from bracket. Remove EBCM mounting screws. Remove EBCM.
  2. Clean mounting surfaces. To install, reverse removal procedure. Tighten EBCM mounting bolts to 44 INCH lbs. (5 N.m). Perform ABS diagnostic system check. See ELECTRONIC BRAKE CONTROL MODULE DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals