Shift Cable: Removal

Remove the throttle body air inlet duct. Use a flat-blade tool in order to remove the retaining clip from the shift cable at the shift cable bracket. See Fig 1 .
Use a large flat-blade tool in order to remove the shift cable from the manual control lever. See Figure . Use pliers in order to depress the cable retainers.
Remove the shift cable from the shift cable bracket. Remove the knee bolster.
Remove the retaining clip from the shift cable at steering column. Remove the shift cable from the column control lever. See Fig 2 .
Remove the shift cable from the steering column bracket. See Fig 3 . Remove the shift cable through the hole in the cowl. See Fig 4 .

Fig 1: Removing & Installing Shift Cable At Transaxle Bracket

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Retaining Clip

Courtesy of GENERAL MOTORS CORP.

Fig 3: Removing & Installing Shift Cable At Steering Column

Courtesy of GENERAL MOTORS CORP.

Fig 4: Locating Shift Cable Pass Through

Courtesy of GENERAL MOTORS CORP.