Description & Operation

A 6-way power seat is available on driver's seat and passenger's seat. System consists of 3 reversible motors attached to a seat drive rail. Each motor contains a self-resetting circuit breaker. Power seat switch is located on left side of driver's seat, or on right side of passenger's seat. Drive cables connect motor to gearnuts, which turn jack screws and adjusters at each side of seat.

The optional heated seat system consists of a heated seat switch, heated seat module, seat cushion and seatback heating elements and a temperature sensor for each front seat. The heated seat module receives battery voltage at all times from the PWR/HEATED SEAT PSD circuit breaker. When a heated seat switch is turned on, the heated seat module receives voltage from the HVAC/DIC/DRL/HEATED SEAT fuse. The temperature sensor, located in seat cushion, senses the temperature of the cushion and sends a signal to the heated seat module to increase or decrease the amount of current to the seat cushion and seatback heating elements.