Installation (1.0L)
WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
To avoid damaging ISC motor, DO NOT apply electrical power to ISC motor before installation.
To install, reverse removal procedure. Tighten ISC motor screws to specification. See TORQUE SPECIFICATIONS . Start engine and operate at normal operating temperature. Ensure idle speed is within 800-900 RPM. See appropriate ON-VEHICLE ADJUSTMENTS article.