Test 4: Left Rear Window Inoperative
- If window is inoperative from left rear door switch only, go to next step. If window is inoperative from both door and master switches, go to step 3 .
- Turn ignition switch to RUN position. Using a test light connected to ground, backprobe door switch connector terminal No. 3 (Blue/White wire). If test light is on, replace door switch in left rear door. See Figure . If test light is off, repair open in Blue/White wire between door switch and junction block. See WIRING DIAGRAMS .
- Turn ignition switch to RUN position. Using a test light connected to ground, backprobe door switch connector terminal No. 1 (Green/Yellow wire) with master switch in UP position, and door switch connector terminal No. 4 (Red/Yellow wire) with master switch in DOWN position. See Figure . If test light is on in both tests, go to step 5 . If test light is off in either test, go to next step.
- Turn ignition switch to RUN position. Using a test light connected to ground, backprobe master switch connector terminal No. 5 (Green/Yellow wire) with master switch in UP position, and master switch connector terminal No. 4 (Red/Yellow wire) with master switch in DOWN position. See Figure . If test light is on in both tests, repair open in appropriate wire between door switch and master switch. See WIRING DIAGRAMS . If test light is off in either test, replace master switch. See POWER WINDOW SWITCHES .
- Test continuity in left rear door switch between terminals No. 4 and 5, and between terminals No. 1 and 2 with switch in NEUTRAL position. See Figure . Test continuity in door switch between terminals No. 3 and 5 with switch in DOWN position, and between terminals No. 2 and 3 with switch in UP position. If any test does not show continuity, replace left rear door switch. See POWER WINDOW SWITCHES . If all tests show continuity, go to next step.
- Test for open in Yellow or Green/Yellow wire, and Red or Blue/Red wire between door switch and window motor connector. If problem was found, repair as necessary. If problem was not found, replace window regulator. See WINDOW REGULATOR & MOTOR .