LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Tracker 2D Utility, 1.6 6, RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Bench Testing >> Brushes & Springs Test

Brushes & Springs Test

  1. Using ohmmeter, check continuity between positive and negative brush holders. Continuity should not exist. If continuity exists, replace shorted brush holder assembly.
  2. Measure brush length and ensure spring tension is within specification. See STARTER SPECIFICATIONS  . Check brush springs for corrosion or damage. Ensure brushes move freely in holders.
scientia non olet · About LEMON Manuals