LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Suburban K2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1280 (Battery, Charging System And Starting System) >> Repair Instructions >> Ground Strap Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. If necessary, remove the engine sight shield.

    Refer to ENGINE SIGHT SHIELD REPLACEMENT (4.8L, 5.3L and 6.0L Engines) or ENGINE SIGHT SHIELD REPLACEMENT (6.0L ENGINE w/RPOs Y91 and Z88) in Engine Mechanical - 4.8 L, 5.3 L, and 6.0 L.

    2. Fig 1: Removing Engine Wiring Harness Ground Bolt
    G01658667Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine wiring harness ground bolt.
  3. Reposition the engine wiring harness ground and ground strap.
  4. Remove the ground strap nut from the stud at the front of dash.
    5. Fig 2: Removing Ground Strap From Stud
    G01658668Courtesy of GENERAL MOTORS CORP.
  5. Remove the ground strap from the stud.
scientia non olet · About LEMON Manuals