LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Prizm Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Bleeding Procedures >> Pressure Tank Bleeding

Pressure Tank Bleeding

  1. Clean master cylinder cap and surrounding area, and remove cap. Add brake fluid if needed. Connect pressure tank to master cylinder following manufacturer's instructions.
  2. Attach vinyl hose to first bleed screw to be serviced. See BRAKE LINE BLEEDING SEQUENCE  table. Place other end of hose in clean, transparent container. Partially fill container with clean brake fluid until end of hose is submerged in fluid. Charge pressure bleeder.
  3. Open bleed screw, noting fluid flow. When fluid flowing into container is clear and bubble free, close bleed screw securely. Finish bleeding system in same manner, using appropriate sequence. Close release valve and remove pressure tank from master cylinder. Check master cylinder reservoir fluid level.
scientia non olet · About LEMON Manuals