LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Metro Base, 2D Hatchback >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel And Steering Column >> Disabling & Activating Air Bag System >> Air Bag System Service Procedures >> Activating System

Activating System

  1. Ensure ignition is in LOCK position and air bag fuse is removed. Ensure all air bag system components are correctly installed.
  2. Reconnect passenger-side inflator module harness connector. Reconnect driver-side inflator module harness connector. Ensure connector lock lever is engaged.
  3. Install glove box and steering wheel access cover. Reinstall air bag fuse to original location. Turn ignition on. Verify AIR BAG warning light flashes 7 times then goes out. If warning light does not operate as described, perform air bag system check. See appropriate AIR BAG RESTRAINT SYSTEMS article in ACCESSORIES & EQUIPMENT.
scientia non olet · About LEMON Manuals