Shift Cable (At Column Shift Control): Installation

1. If installing NEW cable, see SHIFT CABLE (NEW CABLE INSTALLATION ONLY)  . If reinstalling used cable, go to next step.
2. Install the shift cable through the hole in the dash. See Figure . Properly route and position the shift cable. See Fig 1 . Install the shift cable to the manual control lever. See SHIFT CABLE (AT MANUAL CONTROL LEVER)  .
3. Install the shift cable to the shift control lever. See Figure . Install the steering column filler. See STEERING COLUMN FILLER  .
4. Install the shift cable retainer to the stud in the engine compartment. Adjust the shift cable (transaxle side). See SHIFT CABLE  under ADJUSTMENTS.

Fig 1: Identifying Shift Cable Routing

Courtesy of GENERAL MOTORS CORP.