LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala Police >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Transaxle Mount >> Installation

Transaxle Mount: Installation

  1. Position the transaxle mount to the frame. Hand start the transaxle mount bracket to transaxle bolts. Install the transaxle bracket bolts. See Figure . Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Remove the support from the transaxle. Install the transaxle bracket to the transaxle mount upper nuts. See Figure . Tighten the transaxle mount upper nuts to specification. See TORQUE SPECIFICATIONS  .
  3. Install the left engine splash shield. Install the left front tire and wheel. Lower the vehicle.
scientia non olet · About LEMON Manuals