LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Automatic Transmission Service) >> Removal & Installation >> Shift Control Cable >> Removal

Shift Control Cable: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console trim plate. See TRIM PLATE  . Unsnap the range selector lever cable from the transmission control. Remove the retainer and the cable grommet from the base of the transmission control. See Fig 1 .
  2. Raise and suitably support the vehicle. Unsnap the transmission range selector lever cable from the range selector lever on the transmission.
  3. Remove the retainer from the range selector lever cable. See Figure . Remove the range selector lever cable from the cable bracket. Pull the cable through the hole in the front compartment floor pan. Remove the shift cable from the vehicle.
Fig 1: Removing & Installing Shift Cable Retainer (At Shifter)
G00087658Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals