LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Shift Interlock Systems) >> Removal & Installation >> Floor Console >> Installation

Floor Console: Installation

WARNING: This page is about a different car, the 2002 Pontiac Firebird, 2002 Chevrolet Camaro, 2001 Pontiac Firebird, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the console trim plate (1) over the gearshift lever. See Fig 4 . Connect the cigarette lighter electrical connector and the PRNDL light connector.
  2. Insert the forward end of the trim plate (1) into the console. Apply pressure to the console trim plate (1), and snap the trim plate (1) into place. Install the console trim plate bolts (2). Tighten the bolts to 18 INCH lbs. (2 N.m).
  3. Snap the switch plate (2) to the floor console. Connect the electrical connectors (4) to the switches (1, 3), if equipped. See Fig 3 . Install the coin holder to inside the console. See Fig 2 .
  4. Close the console armrest door. Install the shift knob. See FLOOR SHIFT KNOB  . Place the gearshift lever in the Park position. Turn the ignition key to the OFF position (2). See Fig 1 .
Fig 1: Identifying Ignition Key Positions
G00082451Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Coin Holder
G00082452Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing & Installing Console Switches
G00082453Courtesy of GENERAL MOTORS CORP.
Fig 4: Removing & Installing Console Trim Plate
G00082454Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals