Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Fender to Door Hinge Pillar Bolts | 10 N.m | 89 lb in |
| Fender to Engine Compartment Side Rail Bolts | 8 N.m | 70 lb in |
| Fender to Front Compartment Side Rail Bolts | 6 N.m | 53 lb in |
| Fender to Rocker Panel Bolts | 6 N.m | 53 lb in |
| Front Fender Liner Bolt | 7 N.m | 61 lb in |
| Front Fender Liner Screws | 2 N.m | 18 lb in |
| Front Fender Liner Stud Nut | 3 N.m | 27 lb in |
| Front Fender Liner to Front Bumper Fascia Bolt | 2 N.m | 18 lb in |
| Front Fender Liner to Lower Engine Compartment Side Rail Bolt | 7 N.m | 61 lb in |
| Front Fender Upper Diagonal Brace to Inner Fender Bolt | 47 N.m | 35 lb ft |
| Front Fender Upper Diagonal Brace to Radiator Support Bolts | 47 N.m | 35 lb ft |
| Hood Hinge to Fender Bolts | 25 N.m | 18 lb ft |
| Hood Hinge (Upper) Bolts | 27 N.m | 20 lb ft |
| Hood Latch Support to Lower Tie Bar Bolts | 10 N.m | 89 lb in |
| Hood Latch Support to Upper Tie Bar Bolts | 25 N.m | 18 lb ft |
| Hood Latch to Center Support Bracket Bolts | 25 N.m | 18 lb ft |
| Hood Release Handle Base Bolts | 2 N.m | 18 lb in |