LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Corvette 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Controls - Introduction) >> Repair Instructions >> Intake Manifold Runner Control Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Intake Manifold Runner Control Solenoid
    GM894675Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the intake manifold runner control solenoid (IMRC) harness connector.
  3. Remove the IMRC solenoid attachment screws.
  4. Remove both vacuum lines from the IMRC solenoid and remove the IMRC solenoid.
scientia non olet · About LEMON Manuals