Test C: UTD Input Display Information
Scan tool displays UTD input status. This information assists in determining if BCM is able to receive correct inputs to operate UTD system. This information is input from various sources and may be shared with other systems. See UTD INPUT
table.
UTD INPUT
| Input |
Value |
| Ignition 1 |
ON/OFF |
| Ignition 2 |
ON/OFF |
| Ignition 3 |
ON/OFF |
| Key In Ignition |
Active/Inactive |
| Theft Deterrent State |
Active/Inactive |
| PASS-Key(R) State |
Displayed Detection State |
| Driver Door Ajar Switch |
ON/OFF |
| Passenger Door Ajar Switch |
ON/OFF |
| Hood Ajar Switch |
Active/Inactive |
| Hatch/Trunk Ajar Switch |
Active/Inactive |
| Column Lock State |
Displayed Commanded Column Lock State |
| Column Feedback |
Active/Inactive |
| Column Lock/Unlock "A" |
Active/Inactive |
| Column Lock/Unlock "B" |
Active/Inactive |
| Driver Door Lock/Unlock Switch |
Active/Inactive |
| Passenger Door Lock/Unlock Switch |
Active/Inactive |
| Driver Door Key Unlock |
Active/Inactive |
| Passenger Door Key Unlock |
Active/Inactive |
| Courtesy Switch |
ON/OFF |
| Park Lamp Input |
ON/OFF |