LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Corvette 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 215 (Supplemental Inflatable Restraint System) >> Repair Instructions >> SIR Disabling and Enabling Zone 2 >> Disabling Procedure

Disabling Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel so that the vehicle wheels are pointing straight ahead.
  2. Turn the ignition switch to the OFF position.
  3. Remove the key from the ignition switch.
  4. Locate the body control module fuse center then remove fuse center cover.
    5. IMPORTANT: With the AIR BAG fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation, and does not indicate an SIR system malfunction.
  5. Locate and remove the AIR BAG fuse from the body control module fuse center.
    6. Fig 1: Locating Roof Rail Module Connector
    GM899820Courtesy of GENERAL MOTORS CORP.
  6. Remove the garnish molding from the upper lock pillar. Refer to Garnish Molding Replacement - Rear Upper in Interior Trim.
  7. Remove the connector position assurance (CPA) from the roof rail module - left connector.
  8. Disconnect the roof rail module - left connector from the vehicle harness connector.
scientia non olet · About LEMON Manuals