LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Chevy Express G2500, Van Cargo Extended, 6.5 F >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - 4WAL >> Diagnosis & Testing >> Diagnostic System Check

Diagnostic System Check

NOTE: For circuit reference, see WIRING DIAGRAMS  .
  1. Install scan tool. If scan tool powers up, go to next step. If scan tool does not power up, diagnose data link communications. See DATA LINK CONNECTORS article in WIRING DIAGRAMS.
  2. Turn ignition on, with engine off. Using scan tool, attempt to establish communication with PCM and EBCM. If scan tool communicates with control modules, go to next step. If scan tool does not communicate with control modules, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYMPTOM TESTS.
  3. Select display DTCs function on the scan tool for PCM and EBCM. If scan tool displays any DTCs, go to next step. If scan tool does not display any DTCs, go to SYMPTOM TESTS  .
  4. If scan tool displays any DTCs which begins with a "U", go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYMPTOM TESTS. If scan tool does not display any "U" series DTC, go to next step.
  5. If scan tool displays DTC P0500, P0502, P0503, P0562, P0563, P0601-P0607, P1381, P1621, P1627 or P1683, diagnose affected DTCs. See appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.
scientia non olet · About LEMON Manuals