LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Cavalier LS, 2.4 T >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Removal & Installation >> Window Motor >> Removal & Installation

Removal & Installation

  1. Pull inside door handle to full open position. Push in on door handle pull cup, while prying out at top with flat-blade tool. Pull up on door handle pull cup to remove.
  2. On front doors of hardtop models, remove power door lock switch and power window switch. See WINDOW & DOOR LOCK SWITCHES  .
  3. On front doors of convertible models, remove power door lock switch. See WINDOW & DOOR LOCK SWITCHES  .
  4. On all models, remove upper trim finish panel. Remove door trim panel lower screws. Remove door armrest. Remove door panel and set aside.
  5. Remove water deflector enough to access motor/actuator assembly. Disconnect motor/actuator assembly electrical connector. Remove motor/actuator assembly bolts. Remove motor/actuator assembly.
  6. To install, reverse removal procedure. Tighten motor/actuator bolts to 53 INCH lbs. (6 N.m).
scientia non olet · About LEMON Manuals