Content Theft Deterrent System
BCM controls CTD operation. System incorporates the following modes:
- Disarmed
When ignition switch is in LOCK position and doors are closed. SECURITY indicator light will stay off. - Ready To Arm
When ignition switch is in LOCK position and any door is opened. SECURITY indicator light will flash. - Arm Initiated
When ignition switch is in LOCK position, any door is opened and BCM detects a LOCK command from Remote Keyless Entry (RKE) transmitter. SECURITY indicator light will stay on. - Arm Delay
When vehicle is in ARM INITIATED mode and all doors are closed, system will enter ARM DELAY mode for 10 seconds. SECURITY indicator light will stay on. - Armed
After 10 seconds in ARM DELAY mode without any doors opening, CTD enters ARMED MODE. BCM monitors inputs to determine whether to enter ALARM or DISARM mode. SECURITY indicator light will flash slowly. - Pre-Alarm
If any doors or trunk lid are opened, CTD system enters PRE-ALARM mode for 10 seconds. SECURITY indicator light remains on and horn chirps during this 10 second period. Pressing any button on keyless entry transmitter or starting vehicle with a valid Passkey(R) within a 10-second period will disarm system. - Alarm
CTD system will enter alarm state from pre-alarm state after 10 seconds. Horns, interior lights and daytime running lights (DRL) will alternate on and off for 2 minutes, unless BCM receives an unlock command. If 2 minutes elapse, CTD will return to ARMED MODE. If PCM receives a valid Passlock(tm) ignition key rotation while in ALARM mode, CTD will return to OFF mode. - Tampered
After 2-minute alarm state, vehicle will enter a STANDBY mode if either doors or trunk lid remain open. If doors or trunk lid are closed anytime after an alarm, vehicle enters TAMPERED mode. CTD system continues to monitor doors and trunk lid after a 60-second delay. Re-entry into vehicle without disarming system will enable alarm for 30 seconds without pre-alarm warning. CTD system can only be disarmed with keyless entry transmitter. - Remote Panic Alarm/Vehicle Locator
When PANIC button on Remote Keyless Entry (RKE) transmitter is pressed, horns and lights will alternate on and off for 30 seconds, unless PANIC button on RKE is pressed again.