LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1999 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System - Removal, Installation & Overhaul) >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1998 Pontiac Trans Sport, 1998 Oldsmobile Silhouette, and 1998 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner assembly (if necessary). Disconnect harness connector from TP sensor. Remove attaching screws, lock washers, retainers, and TP sensor.
  2. To install, reverse removal procedure. Adjust TP sensor to specification. See ADJUSTMENTS article. When replacing a TP sensor, ensure correct part number is used. Use Loctite on TP sensor attaching screws.
scientia non olet · About LEMON Manuals