LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1999 >> Forward Control P12 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Computer Relearn Procedures) >> Computer Relearn Procedures - Cars >> Aurora & Riviera >> Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (4.0L)

Electronically Erasable Programmable Read Only Memory (EEPROM) Programming (4.0L)

WARNING: This page is about a different variant/trim than selected.
  1. If Powertrain Control Module (PCM) was replaced, the EEPROM in the PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in the PCM or PCM may be damaged. Perform EEPROM programming using the Techline equipment manufacturer's instructions and latest software applicable for the vehicle model.
  2. Once EEPROM is programmed, use scan tool to clear DTC P0603 from PCM. Engine oil life interval and transaxle fluid life interval must now be reprogrammed using proper procedure. Turn ignition off. Wait 30 seconds to ensure all memory learn procedures occur.
scientia non olet · About LEMON Manuals