Memory Seats

NOTE: For information on memory seat systems diagnostic and repair procedures, see appropriate WIRING DIAGRAMS in MEMORY SYSTEMS article

Memory functions are controlled with buttons located in armrest of driver's door. Memory seat, outside mirror, climate control and stereo settings for up to 3 different drivers can be recorded into the seat control module through the memory panel buttons.

To program the seat control module, move seat to most comfortable position. Depress and hold the No. 1 memory button until the indicator light above the memory button glows steady. Continue to hold button down. When the position has been stored, the light will flash once. To record the second setting, repeat function and depress the No. 2 button. For the third setting, the No. 1 and 2 buttons will need to be depressed simultaneously.

To recall a position, depress the button that corresponds with the setting you want recalled. Indicator light will flash until programmed position is achieved. Memory recall will not work if the vehicle is moving, the key is out of the ignition switch or if a seat or memory switch is being used.