Specifications Index
PICKUP CLASSIC SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | See GENERATOR USAGE/AMP OUTPUT RATING table under DESCRIPTION | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 15 psi | ||
| Thermostat R & I | |||
| 5.7L | NA | ||
| 6.5L | THERMOSTAT | ||
| 7.4L | NA | ||
| Water Pump R & I | |||
| 5.7L | WATER PUMP | ||
| 6.5L | WATER PUMP | ||
| 7.4L | WATER PUMP | ||
| Engine Mechanical | |||
| 5.7L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | OIL PRESSURE | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 6.5L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Normal oil pressure is 6 psi (41 kPa) at idle and 30-43 psi (207-296 kPa) at 2000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 7.4L | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | OIL PRESSURE | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| 5.7L | 74 Ft. Lbs. (100 N.m) | ||
| 6.5L | 65 Ft. Lbs. (90 N.m) | ||
| 7.4L | 66 Ft. Lbs. (90 N.m) | ||
| Fuel System | |||
| 5.7L | |||
| Pressure Specification | 60-66 psi (4.2-4.6 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | REMOVAL PROCEDURE (5.0L AND 5.7L) | ||
| 6.5L | |||
| Pressure Specification | NA | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | FUEL MANAGER/FILTER ELEMENT | ||
| 7.4L | |||
| Pressure Specification | 55-62 psi (4.0-4.4 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | REMOVAL PROCEDURE (7.4L) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | 30,000 Ohms Maximum | ||
| Ignition Wires (Routing) | |||
| 5.7L | See appropriate figure under FIRING ORDER | ||
| 7.4L | See appropriate figure under FIRING ORDER | ||
| Spark Plug | |||
| 5.7L | |||
| Type | AC 41-932 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 15 Ft. Lbs. (20 N.m) Tighten spark plugs to 22 ft. lbs. (30 N.m) when using NEW iron cylinder head. Tighten spark plugs to 15 ft. lbs. (20 N.m) when using NEW aluminum cylinder head. |
||
| 7.4L | |||
| Type | AC 41-932 | ||
| Gap | .060 In. (1.52 mm) | ||
| Torque | 15 Ft. Lbs. (20 N.m) Tighten spark plugs to 22 ft. lbs. (30 N.m) when using NEW iron cylinder head. Tighten spark plugs to 15 ft. lbs. (20 N.m) when using NEW aluminum cylinder head. |
||
| Starting | |||
| Starter | BENCH TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | |||
| Single & Dual Rear Wheels (Except C3500HD) | 125 Ft. lbs. (170 N.m) | ||
| With Dual Rear Wheels (C3500HD) | 162 Ft. Lbs. (220 N.m) | ||