LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1999 >> Astro Van Passenger, RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Removal & Installation >> Remote Keyless Entry Receiver >> Installation

Remote Keyless Entry Receiver: Installation

  1. Install the keyless entry control module to the vehicle.
  2. Install the screws retaining the control module to the carrier. Tighten the screws retaining the control module to the carrier to 18 INCH lbs. (2 N.m.).
  3. Connect the remote keyless entry receiver electrical connector.
  4. Install the radio, or the instrument panel storage compartment to the vehicle.
  5. Install the instrument panel cluster trim plate.
  6. Reprogram the transmitter. Refer to REMOTE TRANSMITTER in PROGRAMMING  .
  7. Verify that the system operates properly.
scientia non olet · About LEMON Manuals