LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture Base, Van Passenger Extended >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> Diagnostic Tests >> BCM Diagnostic System Check >> Diagnostic Aids

Diagnostic Aids

  1. The following conditions may result in intermittent operation of BCM with no DTC stored:
    • Any condition which results in interruption of power to BCM.
    • Out of range battery or ignition voltage (normal BCM operating voltage is 9-16 volts).
    • Loose or damaged ground(s).
  2. BCM tests for different malfunctions during different vehicle conditions. A thorough test drive may be necessary to repeat malfunction. Most intermittent problems are caused by faulty electrical connections or wiring. Check for: poor connections, backed-out terminals, dirty or corroded terminals, chafed wires, or damaged connectors.
scientia non olet · About LEMON Manuals