LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System >> System Testing >> CTD System Check >> Setting CTD Modes

Setting CTD Modes

Ensure fuse is removed and ignition switch is in ACC position. Set CTD system sensor mode to Mode 4. See PROGRAMMING  . Set arm/disarm mode to Mode 3. See PROGRAMMING. Turn ignition off. Reinstall fuse. If seat belt indicator flashes and chime sounds, indicating proper CTD mode setting, go to next step. If CTD modes cannot be set, go to TEST NO 1  under SYMPTOM TESTING

scientia non olet · About LEMON Manuals