LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.8L >> Fuel System >> Fuel Pump >> Removal

Fuel Pump: Removal

  1. Fuel pump is located in fuel tank and is integral with fuel sending unit assembly. Relieve fuel pressure. See FUEL PRESSURE RELIEF . Disconnect negative battery cable. Remove rear seat cushion. Remove 4 fuel sending unit assembly access panel bolts and remove access panel. Disconnect electrical connector from fuel sending unit assembly.
  2. Remove fuel pipe from top of fuel sending unit assembly. Remove 8 fuel sending unit assembly hold-down bolts and remove hold-down plate. Remove fuel sending unit assembly and "O" ring from fuel tank.
  3. Remove No. 2 fuel sending unit support and rubber cushion. Remove fuel pressure regulator. Remove fuel pump strainer hold-down clip and remove fuel pump strainer.
  4. Remove No. 1 fuel sending unit support from fuel sending unit plate. Remove No. 1 fuel filter cushion from fuel filter. Disconnect electrical connector from fuel pump. Remove fuel pump from fuel filter.