LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.8L >> Fuel System >> Fuel Pressure Regulator >> Removal

Fuel Pressure Regulator: Removal

  1. Fuel pressure regulator is located on fuel sending unit assembly, on bottom of fuel filter. Relieve fuel pressure. See FUEL PRESSURE RELIEF . Disconnect negative battery cable. Remove rear seat cushion. Remove 4 fuel sending unit assembly access panel bolts and remove access panel. Disconnect electrical connector from fuel sending unit assembly.
  2. Remove fuel pipe from top of fuel sending unit assembly. Remove 8 fuel sending unit assembly hold-down bolts and remove hold-down plate. Remove fuel sending unit assembly and "O" ring from fuel tank. Remove fuel pressure regulator from bottom of fuel filter.
scientia non olet · About LEMON Manuals