LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1998 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 1.8L >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal & Installation

Removal & Installation

  1. Turn ignition off. Disconnect negative battery cable. Remove glove box. Remove console support bracket. Remove left lower finish panel and backing panel. Remove center finish panel. Remove radio.
  2. Remove 2 bolts in rear console box. Remove 2 screws on sides of center console. Slide rear portion of center console back towards rear seats. Remove 2 upper screws on front position of console and remove front portion of console.
  3. Disconnect electrical connectors from PCM. Remove mounting bolts from PCM. Remove PCM. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals